Harmonization of apprenticeship training

Provincial and territorial apprenticeship authorities are each responsible for their respective apprenticeship programs. In the spirit of continual improvement, and to facilitate mobility among apprentices in Canada, participating authorities have agreed to work towards harmonizing certain aspects of their programs where possible. After consulting with their stakeholders in the trade, they have reached consensus on the following elements. Note that implementation of these elements may vary from jurisdiction to jurisdiction, depending on their own circumstances. For more information on the implementation in any province and territory, please contact that jurisdiction’s apprenticeship authority.

1. Trade name

The official Red Seal name for this trade is Painter and Decorator.

2. Number of Levels of Apprenticeship

The number of levels of technical training recommended for this trade is 3 years.

3. Total Training Hours during Apprenticeship Training

The total hours of training, including both on-the-job and in-school training for this trade is 5400.

4. Sequencing Topics and Related Sub-tasks

The topic titles in the table below are placed in a column for each apprenticeship level for technical training. Each topic is accompanied by the sub-tasks and their reference number. The topics in the grey shaded cells represent those that are covered “in context” with other training in the subsequent years.

Apprenticeship level for technical training
Level 1 Level 2 Level 3
 - Safety-Related Functions in context Safety-Related Functions in context
 - Routine Trade Practices in context  -
 - Quality Control Assessments in context Quality Control Assessments in context
Safety-Related Functions
  • 1.01 Uses personal protective equipment (PPE) and safety equipment
  • 1.02 Maintains safe work environment
- -
Tools and Equipment
  • 2.01 Maintains tools and equipment
  • 2.02 Uses rigging, hoisting and lifting equipment
  • 2.03 Uses access equipment
Tools and Equipment
  • 2.02 Uses rigging, hoisting and lifting equipment
  • 2.03 Uses access equipment
-
Routine Trade Practices
  • 3.01 Uses documentation
  • 3.04 Protects surroundings
  • 3.05 Handles materials
- Routine Trade Practices
  • 3.02 Determines project requirements
  • 3.03 Plans job
Quality Control Assessments
  • 4.01 Assesses substrate conditions and deficiencies
  • 4.02 Assesses product conditions and deficiencies
  • 4.03 Assesses quality of painted or coated surfaces and wall coverings
- -
Communication Techniques
  • 5.01 Uses communication techniques
- Mentoring Techniques
  • 5.02 Uses mentoring techniques
General Surface Preparation
  • 6.01 Removes existing paints and coatings
  • 6.02 Removes existing wall coverings and adhesives
  • 6.03 Cleans surfaces
  • 6.04 Primes surfaces
  • 6.05 Sands surfaces
  • 6.06 Applies caulking
- -
Wood Surfaces for Paints, Coatings and Wall Coverings (Introduction/Overview)
  • 7.01 Treats wood surfaces
  • 7.02 Repairs imperfections in wood
Wood Surfaces for Paints, Coatings and Wall Coverings
  • 7.01 Treats wood surfaces
  • 7.02 Repairs imperfections in wood
-
Concrete and Masonry Surfaces
  • 8.01 Mechanically treats concrete and masonry surfaces (Introduction to surfaces)
  • 8.02 Chemically treats concrete and masonry surfaces (Introduction to surfaces)
Concrete and Masonry Surfaces
  • 8.01 Mechanically treats concrete and masonry surfaces
  • 8.02 Chemically treats concrete and masonry surfaces
  • 8.03 Repairs concrete and masonry surfaces
Concrete and Masonry Surfaces
  • 8.01 Mechanically treats concrete and masonry surfaces
  • 8.02 Chemically treats concrete and masonry surfaces
  • 8.03 Repairs concrete and masonry surfaces
- Metal Surfaces
  • 9.01 Treats metal surfaces
  • 9.02 Repairs metal surfaces
-
Plaster Surfaces and Drywall
  • 10.01 Repairs existing plaster surfaces and drywall
  • 10.02 Finishes new drywall
- Plaster Surfaces and Drywall
  • 10.01 Repairs existing plaster surfaces and drywall
Application of Residential, Institutional and Commercial Paints and Coatings(Preparation)
  • 11.01 Prepares residential, institutional and commercial paints and coatings
  • 11.02 Installs residential, institutional and commercial reinforcing mesh
Application of Residential, Institutional and Commercial Paints and Coatings (Preparation)
  • 11.01 Prepares residential, institutional and commercial paints and coatings
  • 11.02 Installs residential, institutional and commercial reinforcing mesh
-
Application of Residential, Institutional and Commercial Paints and Coatings (Applies)
  • 12.01 Applies residential, institutional and commercial paints and coatings with brushes
  • 12.02 Applies residential, institutional and commercial paints and coatings with rollers
  • 12.03 Applies residential, institutional and commercial paints and coatings with applicators (NCC)
  • 12.04 Applies residential, institutional and commercial paints and coatings with spray equipment
Application of Residential, Institutional and Commercial Paints and Coatings (Applies)
  • 12.03 Applies residential, institutional and commercial paints and coatings with applicators (NCC)
  • 12.04 Applies residential, institutional and commercial paints and coatings with spray equipment
Application of Residential, Institutional and Commercial Paints and Coatings (Applies)
  • 12.04 Applies residential, institutional and commercial paints and coatings with spray equipment
- Decorative/Specialty Finishes
  • 13.01 Applies paints and coating using decorative techniques
Decorative/Specialty Finishes
  • 13.01 Applies paints and coating using decorative techniques
  • 13.02 Creates faux finishes
  • 13.03 Applies gilding
  • 13.04 Applies stencils and graphics
  • 13.05 Creates textured finishes
  • 13.06 Applies multi-spec coatings
- Wall Coverings (Preparation)
  • 14.01 Treats surfaces for wall coverings
  • 14.02 Lays out surface
  • 14.03 Prepares wall coverings
-
- Wall Coverings (Applies)
  • 15.01 Applies adhesives
  • 15.02 Installs vinyl wall coverings
  • 15.03 Installs fabric and natural material wall coverings
  • 15.04 Installs rigid wall coverings
  • 15.05 Repairs existing wall coverings
Wall Coverings (Applies)
  • 15.01 Applies adhesives
  • 15.02 Installs vinyl wall coverings
  • 15.03 Installs fabric and natural material wall coverings
  • 15.04 Installs rigid wall coverings
  • 15.05 Repairs existing wall coverings
- Wood Finishing Applications (Prepares)
  • 16.01 Conditions wood surfaces
  • 16.02 Applies wood fillers
  • 16.03 Seals wood surfaces
  • 16.04 Prepares wood finishing products
-
- Wood Surfaces (Finishes)
  • 17.01 Brushes on wood finishes
  • 17.02 Wipes on wood finishes
  • 17.03 Sprays on wood finishes
-
- Industrial Paints and Coatings (Prepares)
  • 18.01 Prepares industrial paints and coatings
  • 18.02 Installs fibre reinforced plastics (FRP)
-
- Industrial Paints and Coatings (Applies)
  • 19.01 Applies industrial paints and coatings with hand tools
  • 19.02 Applies industrial paints and coatings with power tools
Industrial Paints and Coatings (Applies)
  • 19.01 Applies industrial paints and coatings with hand tools
  • 19.02 Applies industrial paints and coatings with power tools