Table of Contents
Task B-6 Performs hand processes
Task Descriptor
Machinists use hand tools and handheld power tools for hand processes, including sawing, drilling, tapping, assembly and disassembly. Benchwork is critical for fully qualified machinists.
B-6.01 - Performs layout
Essential Skills: Document Use, Numeracy, Thinking
B-6.01 - Performs layout
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.01.01P |
determine shape and requirement of layout |
shape and requirement of layout is determined according to specifications |
B-6.01.02P |
select and use layout tools |
layout tools are selected according to workpiece characteristics, operations to be performed and specifications |
B-6.01.03P |
mark workpiece |
workpiece is marked according to specifications |
B-6.01.04P |
verify layout |
layout is verified using measuring and inspection tools |
B-6.01.05P |
perform permanent layout |
permanent markings conform to layout |
Range of Variables
- specifications include: design, standards, client, industry, manufacturers’, drawings
- workpiece characteristics include: material, size, shape, weight, metallurgical properties
- measuring and inspection tools include: calipers, dividers, steel rules, height gauge
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.01.01L |
demonstrate knowledge of basic layout and its application |
define terminology associated with basic layout |
describe the procedures used to read and transfer sizes from a drawing |
calculate layout dimensions and reference points |
describe the procedures used to perform a basic layout |
B-6.01.02L |
demonstrate knowledge of basic layout tools, their applications, maintenance and procedures for use |
identify types of basic layout tools and describe their applications and procedures for use |
identify types of layout media/solutions and describe their applications |
describe the procedures used to inspect, maintain and store layout tools and equipment |
B-6.01.03L |
demonstrate knowledge of precision layout and its applications |
describe the procedures used to perform a precision layout |
B-6.01.04L |
demonstrate knowledge of precision layout tools, their applications, maintenance and procedures for use |
identify precision layout tools and describe their applications and procedures for use |
calculate sine bar values |
calculate angles, arcs and location from reference point |
describe the procedures used to inspect, maintain and store precision layout tools |
Range of Variables
- basic layout tools include: surface tables, angle plates, scribers, dividers and trammels, hermaphrodite calipers, squares, gauges, rulers, layout dye, surface gauges, prick punches, combination set
- precision layout tools include: universal bevel protractor, sine bar, precision height gauge, gauge blocks, surface plate
B-6.02 - Saws workpiece
Essential Skills: Thinking, Document Use, Oral Communication
B-6.02 - Saws workpiece
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
no |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.02.01P |
select blade and pitch for application |
blade and pitch are selected for application according to workpiece characteristics and operations to be performed |
B-6.02.02P |
install and tension blade in the frame |
blade is installed in the frame and tensioned |
B-6.02.03P |
select work holding device |
work holding device is selected according to workpiece characteristics and operations to be performed |
B-6.02.04P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.02.05P |
perform sawing technique |
sawing technique is performed to optimize material removal |
B-6.02.06P |
identify problems |
problems are identified |
B-6.02.07P |
implement solutions |
problems are eliminated |
B-6.02.08P |
verify workpiece |
workpiece is verified that it meets specifications by using inspection equipment |
Range of Variables
- workpiece characteristics include: material, size, shape
- work holding devices include: vises, soft jaws, parallel clamps, c-clamps
- problems include: dull blade, worn set, broken teeth, incorrect pitch
- specifications include: design, standards, client, industry, manufacturers' drawings
- inspection equipment includes: precision square, combination square, steel rule, tape measure, caliper
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.02.01L |
demonstrate knowledge of hand saws, their applications, maintenance and procedures for use |
define terminology associated with hand saws |
identify types of hand saws and describe their applications |
identify types of sawing operations and describe their associated procedures |
identify types of blades and describe their parameters, applications and installation procedures |
identify potential problems during sawing operations and describe their causes and solutions |
B-6.02.02L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to hand saws |
B-6.03 - Files workpiece
Essential Skills: Document Use, Thinking, Continuous Learning
B-6.03 - Files workpiece
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
no |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.03.01P |
select and use filing tools for application |
filing tools are selected and used for application according to workpiece characteristics and operations to be performed |
B-6.03.02P |
select work holding device |
work holding device is selected according to workpiece characteristics and operations to be performed |
B-6.03.03P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.03.04P |
perform filing technique |
filing technique is performed according to specifications |
B-6.03.05P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.03.06P |
identify problems |
problems are identified |
B-6.03.07P |
implement solutions |
problems are eliminated |
B-6.03.08P |
remove debris from file |
debris from file is removed by using file card, and cutting ability of file is restored |
B-6.03.09P |
verify workpiece |
workpiece is verified that it meets specifications by using inspection equipment |
Range of Variables
- filing tools include: single cut, double cut, needle files, handle, file card
- workpiece characteristics include: material, size, shape
- work holding devices include: vise, soft jaws, parallel clamp, c‑clamp
- specifications include: design, standards, client, industry, manufacturers’, drawings
- problems include: file pinning, rounded edges, damage to file
- inspection equipment includes: precision square, combination square, calipers
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.03.01L |
demonstrate knowledge of filing tools, their applications, maintenance and procedures for use |
identify types of filing tools and describe their applications and procedures for use |
describe the procedures used to inspect, maintain and store filing tools |
B-6.03.02L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to filing tools |
Range of Variables
- filing tools include: single cut, double cut, needle files, handle, file card
B-6.04 - Performs hole making operations
Essential Skills: Document Use, Thinking, Numeracy
B-6.04 - Performs hole making operations
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.04.01P |
select prick punch and centre punch |
prick punch and centre punch are selected |
B-6.04.02P |
punch layout |
layout is punched to determine drilling position |
B-6.04.03P |
select handheld tool and centre drill for application |
handheld tool and centre drill is selected for application according to hole size |
B-6.04.04P |
centre drill workpiece |
workpiece is centre drilled |
B-6.04.05P |
select drill for application |
drill is selected for application according to workpiece and operations to be performed |
B-6.04.06P |
drill the workpiece |
workpiece is drilled |
B-6.04.07P |
select countersink for application |
countersink is selected for application |
B-6.04.08P |
countersink workpiece |
workpiece hole is countersunk |
B-6.04.09P |
select reamer for application |
reamer is selected for application |
B-6.04.10P |
ream workpiece |
workpiece is reamed |
B-6.04.11P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.04.12P |
identify problems |
problems are identified |
B-6.04.13P |
implement solutions |
problems are eliminated |
B-6.04.14P |
verify feature |
feature is verified that it meets specifications by using inspection equipment |
Range of Variables
- problems include: drill wandering, oversized holes, damage to cutting tool
- inspection equipment includes: precision squares, combination squares, calipers, gauges
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.04.01L |
demonstrate knowledge of drilling, reaming and countersink operations |
describe the procedures used for spotting and drilling work |
identify types of drills and hand reamers and procedures for use |
describe the procedures used for drilling and reaming work |
B-6.05 - Performs threading operations
Essential Skills: Document Use, Numeracy, Thinking
B-6.05 - Performs threading operations
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.05.01P |
select taps or dies |
taps or dies are selected according to specifications |
B-6.05.02P |
select tap handle or die stock |
tap handle or die stock is selected according to tool, workpiece and operations to be performed |
B-6.05.03P |
select work holding device |
work holding device is selected according to workpiece characteristics and operations to be performed |
B-6.05.04P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.05.05P |
tap or thread workpiece |
workpiece is tapped or threaded |
B-6.05.06P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.05.07P |
identify problems |
problems are identified |
B-6.05.08P |
implement solutions |
problems are eliminated |
B-6.05.09P |
verify feature |
feature is verified that it meets specifications by using inspection equipment |
Range of Variables
- specifications include: design, standards, client, industry, manufacturers' drawings
- work holding devices include: vise, soft jaws, parallel clamp, c-clamp, three-jaw chuck
- workpiece characteristics include: material, size, shape
- problems include: damaged threads, broken taps, cross threading, improper axis alignment
- inspection equipment includes: plug gauges, ring gauges, sample pieces, square
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.05.01L |
demonstrate knowledge of threads and their applications |
define terminology associated with threads |
identify types of threads and describe their purpose and applications |
explain thread fit, classifications and series |
identify types of thread inserts and describe their applications and installation procedures |
describe the importance of thread fit and the use of thread gauges |
identify types of thread failures and describe their causes and solutions |
describe the procedures used to produce threads using taps and dies |
identify types of taps and dies and describe their applications and procedures for use |
describe the procedure to extract broken taps |
B-6.05.02L |
demonstrate knowledge of the procedures used to measure and gauge threads |
calculate and select tap drill sizes in metric and imperial |
identify methods used to measure and gauge threads and describe their associated procedures |
B-6.05.03L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to threading |
B-6.06 - Installs thread inserts
Essential Skills: Document Use, Numeracy, Thinking
B-6.06 - Installs thread inserts
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.06.01P |
clean hole |
hole is cleaned to ensure no contamination |
B-6.06.02P |
select type of thread insert |
type of thread insert is selected according to size, length, application and specifications |
B-6.06.03P |
select installation tool |
installation tool is selected according to insert size and type |
B-6.06.04P |
select work holding device |
work holding device is selected according to workpiece characteristics |
B-6.06.05P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.06.06P |
install thread insert |
thread insert is installed to strengthen or repair the thread |
B-6.06.07P |
verify feature |
feature is verified that it meets specifications by using inspection equipment |
Range of Variables
- specifications include: design, standards, client, industry, manufacturers' drawings
- work holding devices include: vises, soft jaws, parallel clamps, c-clamps
- workpiece characteristics include: material, size, shape
- inspection equipment includes: thread gauges, sample pieces
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.06.01L |
demonstrate knowledge of thread inserts and their applications |
identify types of thread inserts and describe their applications and installation procedures |
explain thread fit, classifications and series |
describe the importance of thread fit and the use of thread gauges |
identify types of thread insert failures and describe their causes and solutions |
B-6.06.02L |
demonstrate knowledge of the procedures used to measure and gauge threads |
calculate and select tap drill sizes in metric and imperial |
identify methods used to measure and gauge threads and describe their associated procedures |
B-6.06.03L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to threading |
B-6.07 - Broaches workpiece
Essential Skills: Numeracy, Thinking, Document Use
B-6.07 - Broaches workpiece
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.07.01P |
select type of broach, bushing and shim |
type of broach, bushing and shim is selected according to specifications |
B-6.07.02P |
perform broaching technique |
broaching technique is performed |
B-6.07.03P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.07.04P |
identify problems |
problems are identified |
B-6.07.05P |
implement solutions |
problems are eliminated |
B-6.07.06P |
verify feature |
feature is verified that it meets specifications using inspection equipment |
Range of Variables
- specifications include: design, standards, client, industry, manufacturers' drawings
- problems include: jamming, breaking broach, tapered cuts
- inspection equipment includes: sample piece, go/no-go gauges, calipers
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.07.01L |
demonstrate knowledge of broaches and broaching equipment, their applications, set up and procedures for use |
define terminology associated with broaches and broaching equipment |
describe the procedures used to set up and operate broaching equipment |
explain the operating principles of broaching equipment |
identify types of broaching equipment and describe their components and applications |
identify types of tooling for broaching equipment and describe their applications |
describe the procedures used to hand broach keyways |
B-6.07.02L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to broaches and broaching machines |
B-6.08 - Performs pressing operations
Essential Skills: Document Use, Thinking, Numeracy
B-6.08 - Performs pressing operations
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.08.01P |
select press |
press is selected according to workpiece characteristics and operations to be performed |
B-6.08.02P |
select work holding device |
work holding device is selected according to workpiece characteristics and operations to be performed |
B-6.08.03P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.08.04P |
set work table height on hydraulic press |
work table height on hydraulic press is set to accommodate workpiece |
B-6.08.05P |
identify interference tolerances |
interference tolerances for specific application are identified according to specifications |
B-6.08.06P |
perform pressing techniques |
pressing techniques are performed |
B-6.08.07P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.08.08P |
identify problems |
problems are identified |
B-6.08.09P |
implement solutions |
problems are eliminated |
B-6.08.10P |
verify feature |
feature is verified that it meets specifications using inspection equipment |
Range of Variables
- press includes: arbor, hydraulic
- workpiece characteristics include: material, size, shape
- work holding devices include: V-blocks, table blocks, collars
- specifications include: design, standards, client, industry, manufacturers' drawings
- pressing techniques include: using expansion/contraction, applying required adhesive or lubricant
- problems include: misalignment, galling, insufficient power, seizing, bending, trapped air
- inspection equipment includes: precision square, depth gauge, straight edge
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.08.01L |
demonstrate knowledge of press equipment, their applications, maintenance and procedures for use |
define terminology associated with press equipment |
describe the procedures used to set up and operate press equipment |
explain the operating principles of press equipment |
identify types of press equipment and describe their components and applications |
B-6.08.02L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to the use of press equipment |
B-6.09 - Forms workpiece
Essential Skills: Numeracy, Document Use, Thinking
B-6.09 - Forms workpiece
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
no |
yes |
yes |
yes |
yes |
no |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.09.01P |
select heating equipment |
heating equipment is selected according to workpiece |
B-6.09.02P |
set up heating equipment |
heating equipment is set up |
B-6.09.03P |
select work holding device |
work holding device is selected according to workpiece |
B-6.09.04P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.09.05P |
determine bend allowance |
bend allowance is determined |
B-6.09.06P |
perform heating technique |
heating technique is performed if required to make workpiece malleable |
B-6.09.07P |
perform bending process |
bending process is performed according to specifications |
B-6.09.08P |
measure and check feature |
feature is measured and checked throughout the process to make adjustments |
B-6.09.09P |
identify problems |
problems are identified |
B-6.09.10P |
implement solutions |
problems are eliminated |
B-6.09.11P |
verify feature |
feature is verified that it meets specifications using inspection equipment |
Range of Variables
- heating equipment includes: oxy-fuel torches, propane torches, induction heaters
- work holding devices include: vise, tongs, anvil
- specifications include: design, standards, client, industry, manufacturers' drawings
- problems include: excessive and insufficient heat, bending force and speeds
- inspection equipment includes: precision squares, combination squares, calipers, protractors, templates, dial indicator
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.09.01L |
demonstrate knowledge of heating processes used in machining operations and their applications |
define terminology associated with heating processes |
identify heating processes and describe their characteristics and applications |
identify types of heating equipment and describe their applications |
describe the procedures used to inspect and store heating equipment |
B-6.09.02L |
demonstrate knowledge of bending processes used in machining operations and their applications |
define terminology associated with bending processes |
identify bending processes and describe their characteristics and applications |
identify types of bending equipment and describe their applications |
B-6.09.03L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to heating and bending processes |
Range of Variables
- heating equipment includes: oxy-fuel torches, propane torches, induction heaters
- bending equipment includes: vises, hammers, presses, mandrels, templates
B-6.10 - Finishes workpiece
Essential Skills: Numeracy, Document Use, Thinking
B-6.10 - Finishes workpiece
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
no |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-6.10.01P |
select finishing process |
finishing process is selected according to specifications |
B-6.10.02P |
clean workpiece |
workpiece is cleaned |
B-6.10.03P |
select abrasives |
abrasives are selected according to workpiece characteristics and operations to be performed |
B-6.10.04P |
select work holding device |
work holding device is selected according to workpiece characteristics and operations to be performed |
B-6.10.05P |
set up workpiece in work holding device |
workpiece is set up in work holding device to protect material and operator |
B-6.10.06P |
perform finishing technique |
finishing technique is performed to achieve required finish |
B-6.10.07P |
measure workpiece |
workpiece is measured throughout the process to make finish adjustments |
B-6.10.08P |
identify problems |
problems are identified |
B-6.10.09P |
implement solutions |
problems are eliminated |
B-6.10.10P |
clean workpiece |
workpiece is cleaned to remove debris |
B-6.10.11P |
verify workpiece |
workpiece is verified that it meets specifications using inspection equipment |
B-6.10.12P |
protect finished workpiece |
finished workpiece is protected using material |
Range of Variables
- finishing processes include: lapping, honing, deburring, polishing, scraping, filing, stoning
- specifications include: design, standards, client, industry, manufacturers' drawings
- abrasives include: hones, stones, lapping compounds, emery papers, fibres
- workpiece characteristics include: material, size, shape
- work holding devices include: vises, soft jaws, parallel clamps, c-clamps
- problems include: scratching, rounded edges, damage to hone, surface finish deficiencies
- inspection equipment includes: precision squares, surface finish comparators, profilometers
- materials include: rust inhibitors, paper, crating, packing
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-6.10.01L |
demonstrate knowledge of abrasives, their applications and procedures for use |
define terminology associated with abrasive finishing |
identify types of abrasives and describe their characteristics and applications |
B-6.10.02L |
demonstrate knowledge of safe work practices and procedures |
identify hazards and describe safe work practices pertaining to abrasives |
B-6.10.03L |
demonstrate knowledge of abrasive finishing techniques |
describe the procedures used to shape or finish a workpiece using abrasive techniques |
identify types of materials and equipment used to lap and hone workpieces |
identify lapping and honing techniques and describe their associated procedures |
identify types of materials and equipment used to buff and polish workpieces |
identify polishing and blending techniques and describe their associated procedures |
Task B-7 Refurbishes components
Task Descriptor
Machinists refurbish components by disassembling, analyzing, repairing and reassembling them. Refurbishment is performed to accomplish a mechanical repair rather than replacing items with new ones.
B-7.01 - Disassembles components
Essential Skills: Document Use, Numeracy, Thinking
B-7.01 - Disassembles components
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-7.01.01P |
read documentation |
documentation is read to assess required disassembly |
B-7.01.02P |
select and use tools |
tools are selected and used according to workpiece characteristics and operations to be performed |
B-7.01.03P |
record disassembly |
records of disassembly are kept |
B-7.01.04P |
mark components |
components are marked to aid reassembly |
B-7.01.05P |
remove necessary components |
necessary components are removed according to workpiece characteristics and operations to be performed |
Range of Variables
- tools include: pullers, hex keys, snap‑ring pliers, wrenches, presses
- workpiece characteristics include: material, size, shape
- records of disassembly include: photos, sketches, notes
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-7.01.01L |
demonstrate knowledge of the procedures used for refurbishing components |
identify types of fits, clearances, tolerances and serviceable limits |
identify types of components and describe their disassembly procedures |
identify types of tools used in refurbishing and describe their procedures for use |
interpret documentation pertaining to refurbishing components |
describe the order of operations used to disassemble components |
Range of Variables
- tools include: pullers, hex keys, snap-ring pliers, wrenches, presses
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
B-7.02 - Analyzes components
Essential Skills: Thinking, Document Use, Numeracy
B-7.02 - Analyzes components
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-7.02.01P |
identify components |
components are identified |
B-7.02.02P |
clean components |
components are cleaned to remove debris and undesired substances |
B-7.02.03P |
inspect components |
components are visually inspected for defects |
B-7.02.04P |
measure components |
components are measured according to specifications using inspection equipment |
B-7.02.05P |
analyze and document findings |
findings are analyzed and documented according to specifications |
B-7.02.06P |
determine need for replacement or repair of faulty components |
need for repair or replacement of faulty components is determined according to analysis |
Range of Variables
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
- defects include: breakage, cracks, excessive wear, damaged seals
- inspection equipment includes: dial indicators, bore gauges, calipers, micrometers, height gauges
- specifications include: design, standards, client, industry, manufacturers’, drawings
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-7.02.01L |
demonstrate knowledge of the procedures used to analyze components |
describe the procedures used to clean components |
describe the procedures used to inspect components |
identify inspection equipment used to inspect components |
B-7.02.02L |
demonstrate knowledge of calculations required to measure components |
calculate and measure component features |
B-7.02.03L |
demonstrate knowledge of procedures used to prepare documentation |
describe the procedures used to prepare documentation |
Range of Variables
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
- inspection equipment includes: dial indicators, bore gauges, calipers, micrometers, height gauges
B-7.03 - Assembles components
Essential Skills: Numeracy, Document Use, Thinking
B-7.03 - Assembles components
NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
yes |
NV |
NV |
NV |
Skills
Reference Code |
Performance Criteria |
Evidence of Attainment |
B-7.03.01P |
replace or repair faulty components |
faulty components are repaired or replaced |
B-7.03.02P |
read documentation |
documentation is read to assess required assembly |
B-7.03.03P |
select and use tools |
tools are selected and used according to operations to be performed |
B-7.03.04P |
lay out and verify components |
components are laid out and verified before assembly |
B-7.03.05P |
fit components |
components are fitted according to specifications using techniques |
B-7.03.06P |
measure and check fit |
fit is measured and checked throughout the process to make adjustments |
B-7.03.07P |
identify problems |
problems are identified |
B-7.03.08P |
implement solutions |
problems are eliminated |
B-7.03.09P |
verify repaired assembly |
repaired assembly is verified according to specifications |
Range of Variables
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
- tools include: feeler gauges, wrenches, hex keys, snap‑ring pliers, presses, pullers
- specifications include: design, standards, client, industry, manufacturers' drawings
- techniques include: lapping, honing, scraping, filing
- problems include: misalignment, incorrect fits, incorrect torque values
Knowledge
Reference Code |
Learning Outcomes |
Learning Objectives |
B-7.03.01L |
demonstrate knowledge of the procedures used for assembling components |
describe the procedures used to repair or replace mechanical components |
identify types of materials used to fit and assemble components and describe their applications and procedures for use |
describe the procedures used to fit and assemble components |
describe the order of operations used to assemble components |
identify tools used to assemble components |
B-7.03.02L |
demonstrate knowledge of calculations required to measure components |
calculate and measure component features |
Range of Variables
- components include: bearings, seals, threaded inserts, adapters/bushings, gears and pulleys, fasteners, snap rings, shafts, gears
- tools include: feeler gauges, wrenches, hex keys, snap-ring pliers, presses, pullers
- materials include: adhesives, sealants, lubricants