Table of Contents
Task E-16 Installs pre-finished solid, engineered, laminate and floating vinyl plank flooring
Task Descriptor
This task encompasses the various installation methods for installing pre‑finished solid, engineered, laminate and floating vinyl plank flooring products.
E-16.01 - Undercuts jambs and trims
E-16.01 - Undercuts jambs and trims
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.01.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.01.02P |
check for wiring |
wiring is checked prior to cutting |
| E-16.01.03P |
select blade |
blade is selected according to material |
| E-16.01.04P |
set blade |
blade is set to finished height of flooring material to be installed and to depth of cut |
| E-16.01.05P |
protect surrounding finished surfaces during cutting process |
surrounding finished surfaces are protected during cutting process using tape and score line to prevent chipping |
| E-16.01.06P |
cut jambs and trims to finished height of flooring material |
jambs and trims are cut to finished height of flooring material to allow for expansion and contraction |
Range of Variables
- tools and equipment include: undercut saws, blades, oscillating tools, jamb saws
- wiring includes: security alarms, doorbells, TV cables, computer wiring, electricity
- material includes: metal, wood
- flooring materials include: laminate, engineered, parquet, solid wood, vinyl plank
- jambs include: steel, wood, medium density fibreboard (MDF)
- trims include: door trims, jambs, baseboards, door casings
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.01.01L |
demonstrate knowledge of jambs and trims, their characteristics and applications |
identify types of jambs and trims, and describe their characteristics and applications |
| E-16.01.02L |
demonstrate knowledge of procedures to undercut jambs and trims |
identify tools and equipment used to undercut jambs and trims, and describe their procedures for use |
| identify hazards and describe safe work practices to undercut jambs and trims |
| describe procedures to undercut jambs and trims |
Range of Variables
- jambs include: steel, wood, medium density fibreboard (MDF)
- trims include: door trims, jambs, baseboards, door casings
- tools and equipment include: undercut saws, blades, oscillating tools, jamb saws
- hazards include: cutting hazards, dust, flying debris
E-16.02 - Installs vapour retarders and underlayment cushion
E-16.02 - Installs vapour retarders and underlayment cushion
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.02.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.02.02P |
select vapour retarder and underlayment cushion |
vapour retarder and underlayment cushion are selected according to codes and flooring material manufacturers’ specifications |
| E-16.02.03P |
finish seams of vapour retarder and underlayment cushion |
seams of vapour retarder and underlayment cushion are finished according to manufacturers’ specifications |
| E-16.02.04P |
position vapour retarder and underlayment cushion |
vapour retarder and underlayment cushion are positioned according to manufacturers’ specifications |
Range of Variables
- tools and equipment include: measuring tape, knives, carpenter square, straightedge, tape
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.02.01L |
demonstrate knowledge of vapour retarders and underlayment cushions, their characteristics and applications |
identify types and classes of vapour retarders, and describe their characteristics and applications |
| identify types and classes of underlayment cushions, and describe their characteristics and applications |
| E-16.02.02L |
demonstrate knowledge of procedures to install vapour retarders and underlayment cushions |
identify tools and equipment used to install vapour retarders and underlayment cushions, and describe their procedures for use |
| identify hazards and describe safe work practices to install vapour retarders and underlayment cushions |
| describe procedures to install vapour retarders and underlayment cushions |
| identify practices that reduce material waste |
| E-16.02.03L |
demonstrate knowledge of regulatory requirements and restrictions pertaining to sound transmission |
identify codes, standards and regulations pertaining to sound transmission |
Range of Variables
- types of vapour retarders include: asphalt saturated paper (tar paper), asphalt laminated craft paper, chemical applied, 6 ml poly, epoxy
- classes of vapour retarders include: 1, 2
- types of underlayment cushions include: open cell foam, cork, rubber, felt
- classes of underlayment cushions include: sound transmission class (STC), impact insulation (IIC)
- tools and equipment include: measuring tape, knives, carpenter square, straightedge, tape
- hazards include: cutting hazards, dust, flying debris
E-16.03 - Establishes layout
E-16.03 - Establishes layout
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.03.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.03.02P |
establish reference line |
reference line is established using chalk line and measuring tools |
| E-16.03.03P |
establish square of area |
square of area is established using 3-4-5 method or swinging arcs method |
| E-16.03.04P |
determine direction of floor joists |
direction of floor joists are determined to establish direction of boards |
| E-16.03.05P |
lay out patterns |
patterns are laid out according to project requirements |
| E-16.03.06P |
establish start line for flooring materials |
start line for flooring materials is established by identifying prominent (longest, straightest) wall |
| E-16.03.07P |
rack flooring materials |
flooring materials are racked to avoid use of small pieces by staggering end joints to maintain consistency of appearance |
| E-16.03.08P |
batch flooring materials |
flooring materials are batched according to manufacturers’ specifications to maintain consistency of appearance |
Range of Variables
- patterns include: herringbone, medallions, borders
- flooring materials include: laminate, engineered, parquet, solid wood, vinyl plank
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.03.01L |
demonstrate knowledge of flooring materials, their characteristics and applications |
identify types of flooring materials, and describe their characteristics and applications |
| identify types of patterns used in flooring material installations |
| E-16.03.02L |
demonstrate knowledge of procedures to establish layout for flooring materials |
identify tools and equipment used to establish layout for flooring materials, and describe their procedures for use |
| identify hazards and describe safe work practices to establish layout for flooring materials |
| describe procedures to establish layout for flooring materials |
| identify mathematical calculations performed to establish layout for flooring materials |
| describe procedures to rack and batch flooring materials for appearance and designs |
| identify practices that reduce material waste |
Range of Variables
- flooring materials include: laminate, engineered, parquet, solid wood, vinyl plank
- patterns include: herringbone, medallions, borders
- hazards include: cutting hazards, dust, flying debris, material handling
- mathematical calculations include: basic geometry, 3-4-5 method, surface area and triangulation, swinging arcs
E-16.04 - Fits materials
E-16.04 - Fits materials
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.04.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.04.02P |
cut flooring material around walls and vertical obstructions |
flooring material is cut around walls and vertical obstructions using fitting methods to allow for expansion and contraction |
| E-16.04.03P |
select flooring material from multiple boxes |
flooring material is selected from multiple boxes to prevent shading and uneven colouring |
Range of Variables
- tools and equipment include: circular saws, compound mitre saws, table saws, jigsaws, laminate shears, routers, drills, oscillating tool
- flooring materials include: laminate, engineered, parquet, solid wood, vinyl plank
- fitting methods include: scribing, direct scribing, reversing board, cutting
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.04.01L |
demonstrate knowledge of flooring materials, their characteristics and applications |
identify types of flooring materials, and describe their characteristics and applications |
| explain acclimation requirements of flooring materials |
| describe expansion and contraction tolerances |
| describe expansion and contraction characteristics of wood species |
| explain importance of measuring moisture, humidity and temperature |
| E-16.04.02L |
demonstrate knowledge of procedures to fit flooring materials |
identify tools and equipment used to fit flooring materials, and describe their procedures for use |
| identify hazards and describe safe work practices to fit flooring materials |
| describe procedures to cut flooring materials |
| describe cutting blade properties |
| describe fitting methods |
| identify materials that can be reconditioned, reused or recycled |
| identify practices that reduce material waste |
Range of Variables
- flooring materials include: laminate, engineered, parquet, solid wood, vinyl plank
- tools and equipment include: circular saws, compound mitre saws, table saws, jigsaws, laminate shears, routers, drills, oscillating tool
- cutting blade properties include: tooth count, kerf and tooth blade material
E-16.05 - Mechanically fastens pre-finished solid and engineered hardwood flooring
E-16.05 - Mechanically fastens pre-finished solid and engineered hardwood flooring
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.05.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.05.02P |
adjust fastening tool |
fastening tool is adjusted for placement and depth of fastener according to thickness of material |
| E-16.05.03P |
fasten material |
material is fastened using fasteners according to material and sub-floor |
| E-16.05.04P |
space fasteners |
fasteners are spaced according to manufacturers’ specifications |
| E-16.05.05P |
face (top) nail or apply an elastomeric adhesive in starting row and finishing row |
face (top) nail or elastomeric adhesive are applied in starting row and finishing row according to industry standards |
| E-16.05.06P |
install spline or slip tongue |
spline or slip tongue is installed to reverse direction of lay |
| E-16.05.07P |
secure spline |
spline is secured by mechanically fastening and applying glue to one groove |
Range of Variables
- tools and equipment include: cleat nailers, staplers, compressors, finishing nail guns, mallets
- fastening tools include: cleat nailers, staplers, compressors
- fasteners include: cleats, staples, nails
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.05.01L |
demonstrate knowledge of pre-finished solid and engineered hardwood flooring, their characteristics and applications |
identify pre-finished solid and engineered hardwood flooring, and describe their characteristics and applications |
| identify types of fasteners, and describe their characteristics and applications |
| E-16.05.02L |
demonstrate knowledge of procedures to mechanically fasten pre-finished solid and engineered hardwood flooring |
identify tools and equipment used to mechanically fasten pre-finished solid and engineered hardwood flooring, and describe their procedures for use |
| identify hazards and describe safe work practices to mechanically fasten pre-finished solid and engineered hardwood flooring |
| describe procedures to mechanically fasten pre-finished solid and engineered hardwood flooring |
| identify practices that reduce material waste |
Range of Variables
- fasteners include: cleats, staples, nails
- tools and equipment include: cleat nailers, staplers, compressors, finishing nail guns, mallets
- hazards include: flying debris, noise, cutting hazards, dust
E-16.06 - Glues down solid and engineered hardwood flooring
E-16.06 - Glues down solid and engineered hardwood flooring
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.06.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.06.02P |
fasten backer board to substrate on starting line |
backer board is fastened to substrate on starting line |
| E-16.06.03P |
establish glue line |
glue line is established to determine placement of adhesive according to adhesive working time |
| E-16.06.04P |
apply adhesive to substrate from backer board to glue line |
adhesive is applied to substrate from backer board to glue line according to manufacturers’ recommendations for open time, working time and spread rate |
| E-16.06.05P |
lay starter rows along backer board |
starter rows are laid along backer board into adhesive from start line |
| E-16.06.06P |
tighten rows |
rows are tightened |
| E-16.06.07P |
stagger end joints |
end joints are staggered according to manufacturers’ specifications |
| E-16.06.08P |
fit tongue into groove |
tongue is fit into groove facing out of backer board to avoid forcing adhesive into gap |
| E-16.06.09P |
clean excess adhesive |
excess adhesive is cleaned off surface while adhesive is still wet |
| E-16.06.10P |
roll flooring |
flooring is rolled according to manufacturers’ specifications |
Range of Variables
- tools and equipment include: clamps, tape, wall jacks, trowels
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.06.01L |
demonstrate knowledge of solid and engineered hardwood flooring, their characteristics and applications |
identify solid and engineered hardwood flooring, and describe their characteristics and applications |
| identify types of adhesives, and describe their characteristics and applications |
| E-16.06.02L |
demonstrate knowledge of procedures to glue down solid and engineered hardwood flooring |
identify tools and equipment used to glue down solid and engineered hardwood flooring, and describe their procedures for use |
| identify hazards and describe safe work practices to glue down solid and engineered hardwood flooring |
| determine substrate construction and preparation |
| describe procedures to glue down solid and engineered hardwood flooring |
Range of Variables
- types of adhesives include: wood glues, polyurethane, modified polymers
- tools and equipment include: clamps, tape, wall jacks, trowels
- hazards include: flying debris, noise, cutting hazards, dust
E-16.07 - Assembles floating floors
E-16.07 - Assembles floating floors
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-16.07.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-16.07.02P |
determine joint type |
joint type is determined |
| E-16.07.03P |
apply laminate adhesive to joints where required |
laminate adhesive is applied to joints where required according to product manufacturers’ specifications |
| E-16.07.04P |
stagger end joints |
end joints are staggered according to manufacturers’ specifications |
| E-16.07.05P |
position flooring around perimeter with spacers |
flooring is positioned around perimeter with spacers according to manufacturers’ recommendations to avoid contact with vertical obstructions |
| E-16.07.06P |
lock joints together |
joints are locked together according to manufacturers’ specifications |
| E-16.07.07P |
maintain integrity of floating floor |
integrity of floating floor is maintained by not fastening to items |
| E-16.07.08P |
install expansion joints at break points |
expansion joints are installed at break points according to manufacturers’ specifications |
Range of Variables
- tools and equipment include: circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, tapping blocks, pull bars, strap clamps, wall jacks
- joint type includes: mechanical, glued
- items include: baseboards, closet door hardware, transitions to floor
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-16.07.01L |
demonstrate knowledge of floating floors, their characteristics and applications |
identify types of floating floors, and describe their characteristics and applications |
| E-16.07.02L |
demonstrate knowledge of procedures to assemble floating floors |
identify tools and equipment used to assemble floating floors, and describe their procedures for use |
| identify hazards and describe safe work practices to assemble floating floors |
| describe procedures to assemble floating floors |
| identify materials that can be reconditioned, reused or recycled |
| identify practices that reduce material waste |
Range of Variables
- types of floating floors include: locking (engineered, laminate, vinyl plank), glued together (engineered, laminate)
- tools and equipment include: circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, tapping blocks, pull bars, strap clamps, wall jacks
- hazards include: flying debris, noise, cutting hazards, dust
Task E-17 Installs custom wood and laminate flooring
Task Descriptor
This task encompasses installing borders and insets and covering stairs using custom wood and laminate flooring products.
E-17.01 - Installs borders, insets and custom fabrications in wood
E-17.01 - Installs borders, insets and custom fabrications in wood
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-17.01.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-17.01.02P |
determine design layout and patterns |
design layout and patterns are determined according to project requirements |
| E-17.01.03P |
cut medallions, insets and borders |
medallions, insets and borders are cut according to project requirements |
| E-17.01.04P |
apply adhesive |
adhesive is applied according to product requirements |
| E-17.01.05P |
install spline or slip tongue |
spline or slip tongue is installed for borders and mitre joints |
| E-17.01.06P |
fabricate custom trims and transitions |
custom trims and transitions are fabricated from field materials |
| E-17.01.07P |
screw and plug plank flooring |
plank flooring is screwed and plugged for decorative purposes |
Range of Variables
- tools and equipment include: jigs, scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills
- adhesives include: wood glues, polyurethane, modified polymers
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-17.01.01L |
demonstrate knowledge of borders, insets and custom fabrications in wood, their characteristics and applications |
identify types of borders, insets and custom fabrications in wood, and describe their characteristics and applications |
| identify types of adhesives, and describe their characteristics and applications |
| describe border design terminology |
| identify types of trims, and describe their characteristics and applications |
| E-17.01.02L |
demonstrate knowledge of procedures to install borders, insets and custom fabrications in wood |
identify tools and equipment used to install borders, insets and custom fabrications in wood, and describe their procedures for use |
| identify hazards and describe safe work practices to install borders, insets and custom fabrications in wood |
| describe procedures to install borders, insets and custom fabrications in wood |
| identify practices that reduce material waste |
Range of Variables
- adhesives include: wood glues, polyurethane, modified polymers
- border design terminology includes: inset, framing, skirting, apron, log cabin, feature strips
- types of trims include: mouldings, reducers, stair nosing, quarter rounds, wedges
- tools and equipment include: jigs, scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills
E-17.02 - Installs wood and laminate flooring on stairs
E-17.02 - Installs wood and laminate flooring on stairs
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-17.02.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-17.02.02P |
determine tread and riser |
tread and riser are determined according to jurisdictional regulations |
| E-17.02.03P |
cut existing nosing to achieve square stair |
existing nosing is cut to achieve square stair according to manufacturers’ specifications |
| E-17.02.04P |
cut material for net fit |
material is cut for net fit |
| E-17.02.05P |
fasten flooring |
flooring is fastened using fasteners according to substrate and product manufacturers’ specifications |
| E-17.02.06P |
cut and finish stair return |
stair return is cut and finished using mitre or router |
Range of Variables
- tools and equipment include: stair jigs, scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, caulking gun
- fasteners include: glues, screws, nails, staples
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-17.02.01L |
demonstrate knowledge of stairs, their components, characteristics and applications |
identify types of stair construction and their components, and describe their characteristics and applications |
| E-17.02.02L |
demonstrate knowledge of procedures to install wood and laminate flooring on stairs |
identify tools and equipment used to install wood and laminate flooring on stairs, and describe their procedures for use |
| identify hazards and describe safe work practices to install wood and laminate flooring on stairs |
| describe procedures to install wood and laminate flooring on stairs |
| identify fasteners used to fasten wood and laminate flooring on stairs |
| identify practices that reduce material waste |
| E-17.02.03L |
demonstrate knowledge of regulatory requirements pertaining to stairs |
identify codes, standards and regulations pertaining to stairs |
Range of Variables
- types of stair construction include: boxed, open-ended, double-ended, bullnose, spiral, curved, Hollywood, floating, winder
- components include: stringers, risers, railings, spindles, nosing, treads
- tools and equipment include: stair jigs, scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, caulking gun
- hazards include: falls, cutting hazards, dust, noise
- fasteners include: glues, screws, nails, staples
Task E-18 Services pre-finished solid, engineered, laminate and floating vinyl plank flooring
Task Descriptor
This task includes repairing and replacing sections of pre-finished solid, engineered, laminate and floating vinyl plank flooring. In some jurisdictions, floorcovering installers may also refinish wood floors.
E-18.01 - Repairs boards
E-18.01 - Repairs boards
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-18.01.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-18.01.02P |
use thermal plastic repair kits for pre-finished wood |
thermal plastic repair kits for pre-finished wood are used according to manufacturers’ specifications |
| E-18.01.03P |
use laminate repair kit |
laminate repair kit is used according to manufacturers’ specifications |
| E-18.01.04P |
fill holes |
holes are filled with putties and crayons |
| E-18.01.05P |
re-fasten loose boards |
loose boards are re-fastened using refastening methods |
| E-18.01.06P |
repair hollow spots |
hollow spots are repaired using refastening methods |
Range of Variables
- tools and equipment include: scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tools, hand tools, adhesive injectors
- refastening methods include: gluing, mechanically fastening, injecting adhesive
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-18.01.01L |
demonstrate knowledge of flooring and repair materials, their characteristics and applications |
identify flooring and repair materials, and describe their characteristics and applications |
| identify types of fasteners, and describe their characteristics and applications |
| E-18.01.02L |
demonstrate knowledge of repair kits, their characteristics, applications and limitations |
identify types of repair kits, and describe their characteristics, applications and limitations |
| E-18.01.03L |
demonstrate knowledge of procedures to repair boards |
identify tools and equipment used to repair boards, and describe their procedures for use |
| identify hazards and describe safe work practices to repair boards |
| describe procedures to repair boards |
| explain repair limitations |
| identify practices that reduce material waste |
Range of Variables
- flooring and repair materials include: wax crayons, putties, stains, mechanical fasteners, adhesives
- fasteners include: brads, finish nails
- repair kits include: thermal plastic, laminate, graining, burn-in, injection
- tools and equipment include: scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tools, hand tools, adhesive injectors
- hazards include: dust, cutting hazards, dangerous fumes, burns, noise, splinters
E-18.02 - Replaces boards and accessories
E-18.02 - Replaces boards and accessories
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-18.02.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-18.02.02P |
protect existing finished surfaces |
existing finished surfaces are protected using materials |
| E-18.02.03P |
determine thickness of wood board to be replaced and set saw |
thickness of wood board to be replaced is determined and saw is set according to depth |
| E-18.02.04P |
remove board |
board is removed without damaging adjacent boards |
| E-18.02.05P |
remove and replace accessories |
accessories are removed and replaced without damaging surrounding area |
| E-18.02.06P |
remove existing click flooring, replace with new and reinstall |
existing click flooring is removed up to damaged area, replaced with new and reinstalled |
| E-18.02.07P |
remove fasteners |
fasteners are removed to prepare for new board |
| E-18.02.08P |
apply adhesives |
adhesives are applied according to flooring material needs, environmental conditions and manufacturers’ specifications |
| E-18.02.09P |
fit and install new board and apply weight |
new board is fit and installed, and weight is applied to minimize raised edges of adjacent boards |
Range of Variables
- tools and equipment include: scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, hand tools, adhesive injector, specialty tools for laminate
- materials include: masking tape, cardboard, plastic
- click flooring includes: laminate, vinyl plank
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-18.02.01L |
demonstrate knowledge of procedures to replace boards and accessories |
identify tools and equipment used to replace boards and accessories, and describe their procedures for use |
| identify hazards and describe safe work practices to replace boards and accessories |
| describe procedures to remove and replace boards and accessories |
| identify practices that reduce material waste |
Range of Variables
- tools and equipment include: scroll saws, circular saws, compound mitre saws, table saws, jigsaws, routers, drills, oscillating tool, hand tools, adhesive injector, specialty tools for laminate
- hazards include: dust, cutting hazards, dangerous fumes, burns, noise, splinters
E-18.03 - Refinishes hardwood flooring
E-18.03 - Refinishes hardwood flooring
| NL |
NS |
PE |
NB |
QC |
ON |
MB |
SK |
AB |
BC |
NT |
YT |
NU |
| NV |
yes |
NV |
NV |
NV |
yes |
NV |
ND |
yes |
yes |
NV |
NV |
NV |
Skills
| Reference Code |
Performance Criteria |
Evidence of Attainment |
| E-18.03.01P |
select and use tools and equipment |
tools and equipment are selected and used according to task |
| E-18.03.02P |
sand and screen surface |
surface is sanded and screened to remove existing finish |
| E-18.03.03P |
apply fillers |
fillers are applied according to existing flooring |
| E-18.03.04P |
remove dust |
dust is removed by vacuuming and tacking floor |
| E-18.03.05P |
apply stain |
stain is applied according to manufacturers’ specifications |
| E-18.03.06P |
apply finish |
finish is applied according to manufacturers’ specifications |
Range of Variables
- tools and equipment include: edgers, drum sanders, vacuums, random orbital sanders, buffers, planetary sanders
Knowledge
| Reference Code |
Learning Outcomes |
Learning Objectives |
| E-18.03.01L |
demonstrate knowledge of hardwood flooring, their characteristics and applications |
identify types of hardwood flooring, and describe their characteristics and applications |
| E-18.03.02L |
demonstrate knowledge of refinishing products, their characteristics and applications |
identify refinishing products, and describe their characteristics and applications |
| E-18.03.03L |
demonstrate knowledge of procedures to refinish hardwood flooring |
identify tools and equipment used to refinish hardwood flooring, and describe their procedures for use |
| identify hazards and describe safe work practices to refinish hardwood flooring |
| describe procedures and techniques to refinish hardwood flooring |
| identify practices that reduce material waste |
| E-18.03.04L |
demonstrate knowledge of regulatory requirements pertaining to refinishing hardwood floors |
identify standards and regulations pertaining to refinishing hardwood floors |
Range of Variables
- refinishing products include: fillers, stains, finishes
- tools and equipment include: edgers, drum sanders, vacuums, random orbital sanders, buffers, planetary sanders
- hazards include: electrocution, dust, noise, dangerous fumes, fire, body strains and pulls, repetitive movements