Appendix B - Tools and Equipment

Hand Tools

• bench hook
• brushes
• burnisher
• chalk line
• chisels (wood, carving, turning)
• clamps (bar, C)
• doweling jig
• file card
• files (wood, metal, laminate)
• glass cutter
• grease gun
• hammer
• honing stones
• J-roller
• levels
• mallet (rubber, dead blow, wood)
• measuring cup
• mitre trimmer
• moisture meter
• nail sets
• oilcan
• planes (jack, smooth, fore, block, router, rabbet)
• pliers (side cutters, linesman, needle nose)
• pocket screw jig
• pry bar
• putty knife
• sanding block
• saws (back, hack, dovetail, coping, keyhole, hand)
• scraper (cabinet, paint)
• scratch awl
• screwdrivers
• spokeshave
• utility knife
• viscosity cup
• wet mil gauge
• wheel dresser
• wood rasp
• wrenches

Portable Pneumatic and Power Tools

• air compressor
• angle grinder
• biscuit jointer
• drill and bits
• driver and bits
• flush trimmer
• glue gun
• heat gun
• iron
• laminate trimmer
• nail/staple gun (pneumatic, electric, gas-powered)
• power plane
• powder-actuated tools
• router and bits
• sanders (detail, random orbital, belt, palm)
• saws (reciprocating, circular, jig, mitre, table)
• spray system

Stationary Power Tools and Equipment

• air compressor
• air dryer
• band saw
• bench grinder
• case clamp
• clamp rack
• continuous gluing machine
• conveyorized glue applicator
• copy grinder
• curing ovens
• double-ended (twin) saw
• drawer press
• drill press
• drying system
• dust collector
• gang saw
• glue roller
• guillotine
• hinge boring machine
• horizontal boring machine
• horizontal copying lathe
• jointer
• lift tables
• mortising machine
• moulders
• multi-boring machine
• multi-spindle shaper
• overhead pin router
• panel saw (horizontal, vertical)
• pneumatic press (clamping)
• postforming machine
• press (hot, cold)
• profile and moulding sanding machine
• radial arm saw
• sanders (disc, wide belt, edge belt, spindle, oscillating, stroke)
• scroll saw
• shaper
• spider clamps (clamp carrier)
• spray booth
• spraying systems
• table saw
• thickness planer
• vacuum press
• veneer saw
• veneer splicer
• wood lathe

Automated and CNC Equipment

• automatic wide belt sander
• beam saw
• CNC machining center
• case clamp
• copying lathe
• dovetailer
• doweling machine
• edge banding machine
• gang saw
• mortising machine
• multiblade rip saw
• panel stacker
• power feeders
• optimizing saw (computerised)

Shop-manufactured Related Devices

• arc cutter
• assembling tables
• assembly jigs
• auxiliary fence
• cauls
• centre finders
• cove-cutting fences
• custom benches
• featherboards
• forklift
• locating spacers
• machining jigs
• pallet jack
• push blocks
• push sticks
• roller line
• sanding blocks
• saw horses
• shooting board
• sliding tables
• steam bending box
• straight edge
• templates

Layout Tools

• angle finder
• calipers
• chalk line
• combination square
• compasses
• computer software
• contour gauge
• drawing board
• laser level
• manual level
• framing square
• hand calculator
• imperial and metric scale rules
• marking gauge
• measuring tape
• personal computer
• plumb bob
• scratch awl
• set square
• speed square
• spring clamps
• steel square
• straight edges
• stud finder
• sliding T-bevel
• T square
• trammel points
• try square
• writing tools (pencil, marker)

Metalworking Tools

• centre punch
• file
• hack saw
• metal shears

Personal Protective Equipment and Safety Equipment

• apron
• coveralls
• dust mask
• ear protection
• eye wash station
• face shield
• fire extinguisher
• first aid kit
• fresh air system and hood
• hair net
• head protection
• gloves
• goggles
• respirator
• safety boots
• safety glasses